• Welcome to Phoenix Rising!

    Created in 2008, Phoenix Rising is the largest and oldest forum dedicated to furthering the understanding of and finding treatments for complex chronic illnesses such as chronic fatigue syndrome (ME/CFS), fibromyalgia (FM), long COVID, postural orthostatic tachycardia syndrome (POTS), mast cell activation syndrome (MCAS), and allied diseases.

    To become a member, simply click the Register button at the top right.

Mold Free Home Building Ideas

Here is what I have to contribute.

Some day I would like to build a house. So I have been doing research into how to build a house that would be less likely to encourage mold growth. Here are some good looking resources that I have found.

I began by thinking of some philosophical ideas:

1.Absolutely no standard drywall (aka gypsum board, sheetrock). Toxic mold loves this stuff.

2.No basement. That’s just asking for trouble.

3.No Heating, Ventilation, and Air Conditioning (HVAC) ductwork. Dust can collect in ductwork, which mold can grow on. You can’t see what is going on in ducts. In order to avoid having ductwork in a house, you would have to use radiant in-floor heating, probably. And one may need to use more than one wall or window-mounted air conditioner. Probably small houses with open floor plans would work best with a ductwork-free design.

4.Lots of fresh air. Ventilation seems crucial. Many of the latest and greatest home building ideas are extremely air-tight, for energy efficiency. So most modern homes have a heat recovery ventilator. It brings in fresh air without losing so much of the heat/coolness that is desired in the house. One might consider getting a larger one than is needed for the size of the house, or having more than one.

5.No hidden wood. I would feel more comfortable if I could see any wood that was used, so that I could keep an eye on it. The situation I am trying to avoid is a wall made out of two by fours, with a plumbing pipe running through it, that is all sealed up so you can’t see what is happening in there.

6.Visible plumbing. You know, I’d rather have slightly unsightly plumbing pipes running along the walls than to have them hidden inside the walls. I would certainly ask a plumber if this is possible. It’s a thought, anyway.

7.No chip board, plywood, oriented strand board, or other composite wood products made with a lot of glue and formaldehyde. Most of us have chemical sensitivities. I’m trying to find products that don’t off-gas a lot. Plus cellulose in general is food for toxic mold.

8.Whenever possible, I lean toward building products and technologies that are good for the environment.


Here is the List of Links:
(There are a lot of dome-shaped buildings in here. Domes or rounded roofs resist winds and storms. They solve the problem of the leaky, storm-damaged roof because there is no separate roof to blow off.)

Here is a page that lists a lot of yurt manufacturers:
http://www.yurtinfo.org/companies.php

Here is a new company that makes an emergency shelter for natural disasters. It is more sturdy than a tent, but can be assembled and taken down more easily than a house.
http://www.intershelter.com

Styrofoam dome houses made in Japan. So far, they don’t seem to have a US distributor. I hope they are available here soon.
http://www.i-domehouse.com/

They're here! The above company has finally arrived in the US!
So far it looks like they are offering their most basic model.
http://www.usadomes.com

Steel buildings are usually used for garages and workshops, but they can also be made into homes. Here is one example of a good company for them:
http://www.steelmasterusa.com/

These fabric shelters look really interesting:
http://www.bigtopshelters.com/index.htm

This company makes concrete dome houses, and also pre-built concrete dome cabins that they can ship anywhere.
http://www.monolithic.com/

Concrete and Polyurethane foam houses:
http://www.mustangconstruction.com/pages/concrete_Homes_Info.asp
They use walls and floors made by this company:
http://www.dukaneprecast.com/pdfs_design/DOUBLE-WALL.pdf

A 3-D Printed House made of Concrete and Foam Insulation
http://apis-cor.com/en/
The sample house looks really neat! They are in Russia now and planning to go worldwide.

Aircrete is the name that is being used for all kinds of concrete with air bubbles in it. This website is by a man who developed a system for making it yourself and building a dome house out of it.
http://www.domegaia.com/

To make things confusing, AAC, or autoclaved aerated concrete, also comes in a brand called Aircrete. This kind of concrete is full of bubbles, but is cured in a steam autoclave machine. It is a little bit chemically different, and has been around a long time.
Here is one manufacturer of it:
http://www.hebel-usa.com/#_sub2103

Here is another manufacturer: (this one is located in central Florida, so I would order a test piece to find out if it is coated with mold toxins or not)
http://www.aerconaac.com/



Here are some very modern houses that are put together like Tinkertoys. They really do make stick-built houses look obsolete. They aren’t cheap, but they are fast and easy to assemble.

The TomaHouse (some of the versions have no wood in them):
http://www.tomahouse.com/

The IT House:
http://www.tkithouse.com/

Blue Sky Building Systems
http://blueskybuildingsystems.com/

Building Components:

The ThermaSteel company makes foam and steel panels for walls and roofs. They make construction fast and easy. They look like a fabulous option for us, but they are not cheap.
http://www.thermasteelcorp.com/

Insulated Concrete Forms (ICFs) would be a mold-free way to construct a building. This company seems to be the best in the field. They offer a complete system of insulated foundation, walls, and roof.
http://www.nudura.com/en/nudurahome.aspx

This company makes an insulated, heated slab on grade foundation system.
http://www.legalett.ca
http://www.amcfoam.com/PDFs/The_Legalett_Way.pdf

Steel framing components might be a good alternative to conventional wood framing. Here is a general information website about steel framing:
http://www.steelframing.org/index.php

Recycled steel beams for framing:
http://www.cmcsteelproducts.com/About.html

MagnesiaCore is an alternative for conventional drywall, for exterior sheathing, and for floor underlayment. It is made of magnesium oxide and creates waterproof yet breathable walls.
http://www.magnesiacore.com/

Plaster Max coating.This can be used to coat interior walls. They are working on an exterior product which will be applied like stucco.
http://gigacrete.com/

Airkrete insulation is so environmentally friendly, Al Gore used it for his house.
http://www.airkrete.com/

When it comes to windows, it looks like aluminum or vinyl windows would be safe to use, but they don’t look very nice. I found several companies that make steel windows, which look very nice but probably cost a lot more:
http://www.steelwindowsanddoors.com/
http://www.torrancesteelwindow.com/
http://www.hopeswindows.com/products/prodhome_res.shtml
http://www.visionswindows.com/

Radiant electric heating looks like a nice way to heat a home without ductwork. This is the only company that says their product does not produce EMFs:
http://www.suntouch.com/

These small, elegant wall-mounted air-conditioners look like they would be great for a little cottage or well-insulated house:
http://www.fujitsugeneral.com/wallmounted.htm
http://www.mitsubishicomfort.com/

This heat recovery ventilator seems to be the only brand that does not produce condensation, so it does not have a pan of water that needs to be emptied:
http://www.renewaire.com

Another great idea is the tankless water heater. Instead of having a big boiler full of hot water, you just have a box on the wall that heats water only when you need it. Here are some articles about them:
http://www.tanklesswaterheaterguide.com/
http://homerepair.about.com/od/plumbingrepair/ss/tankless_hwh.htm

I like the looks of these washer hoses. It would be nice to have washer hoses that won’t break and cause a flood in the laundry room.
http://www.safehomeproducts.com/shp2/shpsearch.aspx?kw=washer+hoses

Here are some building components that I am not sure about. I’ll include them here in case someone feels like they would be good:

Rammed earth seems to be popular in southwestern states:
http://www.greenhomebuilding.com/rammedearth.htm

Ceramic Houses; basically fired adobe:
http://en.wikipedia.org/wiki/Ceramic_houses

Cobb Houses. The walls contain straw, but they are very inexpensive to build:
http://www.greenhomebuilding.com/cob.htm

Stone Building:
http://www.hollowtop.com/cls_html/limited.htm
http://www.motherearthnews.com/Modern-Homesteading/1981-11-01/Seven-Reasons-to-Prefer-Stone-Building.aspx
http://www.grannysstore.com/Do-It-Yourself/stone_masonry.htm
http://www.kohlerandlewis.com/joe/SH.htm

Comments

I just learned my house is filled with Aspergillus and Chatonium! Seems to explain a lot.
 
I'm so sorry, Xandoff! It's shocking how many of us have been living in homes with toxic mold issues, and how many of us are genetically less able to get rid of mold toxins from our bodies.
 
I am interested in all this. Thanks for all the great links.

I agree ductwork is bad, but window air conditioners grow mold too.

Another topic to consider is paints and varnishes if any are used. I was told that mildew-resistant paints are horrible as they will grow tougher resistant strains.
 
You're welcome!
I guess some people might prefer not to use air conditioners at all. Maybe you could build on top of a hill where the breezes are good and put in lots of windows?
Yes, I didn't get into paints and varnishes on this list, but I know they are important to many of us. I have heard that about mildew-resistant paints, also.
 
I would definitely avoid any paint with mildewcide added to it. It is full of VOCs. I write a post that goes through all the chemical-free finishes available if anyone is interested in that.
 
That is very cool, Cornichon! Would you be willing to give us a link to your post about chemical-free finishes? I haven't done much research on them yet.

I have heard from people with mold sensitivities who have used that anti-mold paint that it just causes even worse, more toxic kinds of mold to grow. Maybe because it feeds on the chemicals.
 
There is a mold free construction certification - GreenGuard now. It looks like its getting a fair amount of attention.
http://www.greenguard.org
 
Hey, thanks for letting me/us know!
Although I don't know if it would be mold-free enough for someone like me. But it's so great to see awareness of the problem. I dream of the day when buildings are made without conventional drywall and sticks.
 
I am just figuring out that prefab concrete manufacturers might only ship to places near their factory. So even though the one used by Mustang Construction in Naperville, IL looks great, they wouldn't ship to my state. I wonder if I should consider moving to that suburb called Bolingbrook in IL where they have built all concrete houses???
 
Oh joy! The International Dome House Company has finally arrived in the US!
We can now buy their most basic model, which is a small dome house perfect for an inexpensive home that can be cusomized to be free of any toxins or irritants.
 

Blog entry information

Author
Forebearance
Read time
6 min read
Views
3,467
Comments
12
Last update

More entries in User Blogs

  • Daily doodal dandy
    Just testing this out
  • Covid day 75
    Well since my last few updates I started to suffer from exhaustion and...
  • Pray
    If you pray, will you pray for me please? I have covid pneumonia and...

More entries from Forebearance